You have Clash Verge Rev running on Windows — now what? The most common next step is importing your provider's subscription link so the client can download nodes, routing rules, and proxy groups automatically. Without a valid profile, the Proxy page stays empty and nothing routes through the Mihomo core.

This guide focuses entirely on Clash Verge Rev subscription import and node updates on Windows in 2026. We assume the app is already installed and launches normally. You will learn where to paste the URL, how to refresh nodes when your provider adds servers, and how to confirm the subscription is actually active before you rely on it for daily browsing.

Before You Import

Take thirty seconds to confirm these basics — they prevent most first-import failures:

  • Clash Verge Rev is installed and opens — You should see the main window or a tray icon in the system tray. If the app will not start, finish installation first via our download page.
  • A Clash-compatible subscription URL — Most providers offer a link labeled "Clash," "Clash Meta," or "Mihomo." It typically starts with https:// and contains a long token. Avoid generic "SSR" or "V2Ray-only" links unless your provider explicitly states they work with Clash.
  • Active account with remaining traffic — Expired plans or exhausted data caps often return empty configs or HTTP 403 errors during fetch.
  • Network access to the provider — Some dashboards block subscription downloads from certain regions. If fetch fails, try from a browser on the same PC first.

Clash Verge Rev stores each subscription as a profile on the Profiles page. A profile is either remote (linked to a URL that auto-updates) or local (a YAML file on disk). For airport users, remote import is the standard workflow.

Step 1 — Get Your Subscription URL

Your provider dashboard — sometimes called a "user center" or "client download" page — is where the subscription link lives. The exact label varies, but look for buttons like Copy Clash subscription, One-click import link, or Subscription URL.

  • Log in with the account credentials your provider gave you.
  • Find the section for desktop clients or Clash / Mihomo.
  • Click copy — do not share this URL publicly. Anyone with the link can consume your traffic quota.

If your provider offers multiple link types, choose the one marked for Clash Meta or Clash Verge. These bundles include the proxies, proxy-groups, and rules sections that Clash Verge Rev expects. A bare node list without rules still works, but you lose intelligent split routing.

Some providers rotate subscription tokens after a password reset. If an old link suddenly returns 403, log back into the dashboard and copy a fresh URL before troubleshooting the client.

Step 2 — Add the Subscription in Clash Verge Rev

With the URL on your clipboard, open Clash Verge Rev and follow these steps. The UI uses English labels in the default locale; menu names below match the current Clash Verge Rev release.

1

Open Profiles — Click Profiles in the left sidebar. This page lists every remote or local configuration you have imported.

2

Create a new profile — Click the New button (or the + icon) at the top of the Profiles page.

3

Choose Remote — Select Remote as the profile type. This tells Clash Verge Rev to fetch configuration from a URL instead of reading a local file.

4

Paste the subscription URL — Paste your link into the URL field. Optionally set a display name (for example, your provider name) so you can tell profiles apart later.

5

Save and fetch — Click Save. The client immediately downloads the YAML config. A progress indicator or timestamp appears on the profile card when the fetch succeeds.

That is the core Clash Verge subscription import flow: Profiles → New → Remote → paste → save. The downloaded file includes your node list and, in most cases, pre-built strategy groups such as Auto, HK, US, or Fallback.

Activate the Profile

Importing alone does not switch your active configuration. On the profile card, click Use (sometimes shown as a checkmark or "Activate"). The card highlights to show it is the current profile, and the Mihomo core reloads with the new nodes and rules.

If you skip this step, the Proxy page may still show nodes from an older profile or remain blank. Always click Use after adding or switching subscriptions.

Step 3 — Update Nodes and Refresh the List

Providers add, remove, or rename servers regularly. Updating nodes in Clash Verge Rev pulls the latest YAML from your subscription URL without re-entering the link.

1

Manual refresh — On the Profiles page, find your profile card and click the refresh or update icon (circular arrow). Wait until the "last updated" timestamp changes.

2

Set auto-update interval — Open the profile's settings (gear icon or right-click menu). Set an update interval such as 24 hours or 12 hours. The client will fetch in the background on that schedule.

3

Check the Proxy page — Switch to Proxy in the sidebar. Expand proxy groups to see individual nodes. Run a latency test (speed-test icon) to identify responsive servers.

When every node shows timeout or high latency after an update, the issue is usually on the provider side — wait a few minutes and refresh again, or pick a different region group if your subscription includes one.

Auto-Update Best Practices

  • 12–24 hours is a sensible default. Shorter intervals increase network chatter without meaningful benefit for most users.
  • Do not refresh during an active session if you are mid-download through the proxy — a reload can briefly drop connections.
  • Multiple profiles each maintain their own update schedule. Importing a second provider creates a second card with independent refresh settings.

Step 4 — Select a Node and Enable the Proxy

After the subscription is active, choose how traffic exits the network:

  • Go to Proxy and expand a strategy group (for example, Proxy or Auto).
  • Click a node name to select it, or choose DIRECT / REJECT where applicable.
  • Enable System Proxy from the main toggle or the tray icon menu. Windows applications that respect system proxy settings will now route through Clash.
  • Confirm the mode is set to Rule (recommended) unless you intentionally want all traffic proxied via Global mode.

For apps that ignore system proxy — games, some CLI tools, certain Electron apps — enable TUN Mode under Settings after granting administrator permission. TUN captures traffic at a lower level and is optional for basic browser use.

Step 5 — Confirm Your Subscription Is Working

Before closing the client, run through this quick verification checklist. It answers the most common question after import: "Did it actually work?"

  • Profile status — On Profiles, your card shows a recent update time and is marked as the active profile (highlighted or tagged "In use").
  • Nodes visible — Proxy page lists groups and individual servers, not an empty panel.
  • Latency test — At least one node returns green or low millisecond values when you run the built-in test.
  • System proxy on — The tray icon or dashboard toggle shows system proxy enabled.
  • Traffic test — Open a browser and visit an IP-check site or any resource your provider expects you to reach. The result should reflect the proxy route, not your raw ISP address — unless Rule mode sends that specific domain direct.

If the profile downloads but no nodes appear, open the profile's log or the client log (Settings → Logs) and look for YAML parse errors. Malformed configs from the provider require contacting their support, not reinstalling Clash Verge Rev.

Managing Multiple Subscriptions

Clash Verge Rev supports several remote profiles at once — useful if you maintain a backup provider or separate work and personal configs.

  • Repeat the import steps for each URL. Each subscription appears as its own card on Profiles.
  • Click Use on the card you want active. Only one profile drives the running core at a time.
  • Inactive profiles stay on disk; you can switch between them without re-pasting URLs.
  • Use descriptive names so you do not activate the wrong provider by mistake.

For merge rules or custom snippets without editing the provider's YAML directly, explore the Merge and Script options in profile settings — advanced topics covered in our tutorial · import subscription section.

Troubleshooting Common Import Problems

"Failed to fetch" or network timeout

Disable system proxy temporarily so the client fetches the subscription over your direct connection. Verify the URL opens in a browser (it may download a YAML file or show encoded text). Check Windows Firewall is not blocking Clash Verge Rev, and confirm your provider's server is online.

HTTP 403 or "subscription expired"

The token in your URL may be revoked or your plan expired. Log into the provider dashboard, renew if needed, and copy a fresh link. Replace the old URL by editing the profile or deleting it and importing again.

Profile downloads but Proxy page is empty

You likely forgot to click Use, or the YAML contains no proxies section. Activate the profile first. If still empty, refresh the subscription or ask your provider whether the Clash link is configured correctly.

System proxy enabled but sites do not load

Select a working node after running latency tests. Switch to Global mode briefly to isolate rule misconfiguration. If only specific apps fail, enable TUN mode. Also confirm no other VPN or proxy tool is conflicting on the same port.

Antivirus intercepts the fetch

Some security suites inspect HTTPS traffic and break subscription downloads. Add Clash Verge Rev's install folder to your antivirus exclusion list — the same approach recommended during installation.

Frequently Asked Questions

Where do I add a subscription in Clash Verge Rev?

Go to Profiles → New → Remote, paste your URL, and save. Then click Use on the profile card to activate it. This is the standard path for airport subscription import on Windows.

How do I update nodes in Clash Verge Rev?

Click the refresh icon on your profile card on the Profiles page, or configure an automatic update interval in the profile settings. After updating, open Proxy and run a latency test to pick a healthy node.

What is the difference between a subscription URL and a config file?

A subscription URL points to a remote YAML that your provider updates server-side — you refresh to get new nodes. A local config file is a static YAML you import once and must replace manually when nodes change. Remote subscriptions are easier for ongoing use.

Clash Verge Rev runs the Mihomo (Clash Meta) core. Choose the Clash Meta link if your provider offers both; it supports newer protocols like VLESS, Hysteria2, and TUIC. A standard Clash link usually still works for common Shadowsocks and VMess nodes.

Can I share my subscription URL with friends?

No. The URL embeds your credentials and traffic quota. Sharing it lets others consume your plan and may violate your provider's terms. Treat it like a password.

How do I switch between two imported subscriptions?

On Profiles, click Use on the card you want active. The core reloads with that profile's nodes and rules. Your other profiles remain saved for quick switching later.

Get Started with Clash Verge Rev on Windows

Generic one-click VPN apps hide their server lists, throttle free tiers, and vanish when app stores remove them. Clash Verge Rev takes the opposite approach: you bring your own subscription, see every node and rule, and control split routing through the open-source Mihomo core. Subscription import takes under a minute once you have the URL — and refreshing nodes is a single click when your provider rotates servers.

Compared with closed-source Windows proxy tools, Clash Verge Rev offers transparent GitHub releases, active community maintenance, and feature parity with mobile ClashMeta clients. You are not locked into a single vendor's network — switch providers by importing a new profile, or run multiple subscriptions side by side.

If Clash Verge Rev is not on your PC yet, grab the latest Windows build from our Clash download page, install it, then follow the steps above to import your subscription, update nodes, and confirm the proxy is live. From first paste to a working connection, most users finish in under five minutes.